What makes the Lovense Tenera 2 different?

Tenera 2 does not rely on a vibrating tip pressed directly against the clitoris. Its PulseSense system repeatedly moves air through the soft mouth to produce suction-style pressure waves. Lovense redesigned the neck and airflow system to provide stronger pressure, while the wider opening is intended to surround more of the clitoral area.

Lovense Tenera 2 at a glance

How does the Lovense Tenera 2 work?

The round silicone mouth is placed over or around the clitoral area. Its internal mechanism rapidly moves air through the opening, producing alternating pressure around the external tissue.

The sensation is often described as pulsing, fluttering or suction-like. There is no mechanical component that grabs or physically pulls the clitoris into the device.

A light seal between the silicone rim and skin helps the pressure waves feel more distinct. The user can change the intensity using the physical controls or through the Lovense Remote app.

Is Tenera 2 really a suction toy?

Tenera 2 is commonly described as a clitoral suction toy or clit sucker. More precisely, it uses repeated air-pressure pulses to create a suction-style sensation.

It does not maintain a strong continuous vacuum. Instead, the airflow rises and falls rapidly, creating changing pressure around the clitoral area.

Neither style is automatically better. Some users prefer air pulses because direct vibration can feel numbing or overly intense, while others prefer the deeper contact of a wand or bullet vibrator.

PulseSense air-wave technology

Lovense describes Tenera 2 as using its patented PulseSense technology. The redesigned system can produce up to 4,500 air pulses per minute.

The second-generation design includes:

• A thicker neck around the stimulation mouth
• Greater internal airflow
• Stronger maximum suction-style pressure
• A wider mouth intended to surround more of the target area
• App-adjustable levels and patterns

The maximum pulse figure describes how rapidly the pressure changes occur. It does not mean that every user should begin at the highest setting.

Wider silicone mouth and improved seal

The stimulation mouth is designed to surround the clitoral area rather than press one narrow point directly against it.

Lovense’s official measurement diagram shows the mouth assembly at approximately 21.8 mm across and 26.2 mm high. These measurements describe the outer assembly and should not be treated as a guaranteed anatomical fit.

Several factors can affect the seal and perceived strength:

• The angle at which the mouth meets the skin
• The amount of water-based lubricant used
• Body shape and clitoral anatomy
• Whether hair interrupts the silicone rim
• How firmly the user presses the device
• The selected pulse intensity

A stronger seal usually makes the pressure pulses feel more pronounced. Excessive pressure is unnecessary and may make the experience uncomfortable.

How to use the Lovense Tenera 2

1. Fully charge and clean the product before its first use.
2. Apply a small amount of water-based lubricant around the silicone mouth and to the external area.
3. Press and hold the power button for approximately three to five seconds.
4. Begin with the lowest standard level.
5. Place the opening over or slightly beside the clitoral area.
6. Adjust the position until the silicone rim forms a comfortable seal.
7. Increase the intensity gradually.
8. Experiment with steady levels and changing pulse patterns.
9. Move the device away immediately if the sensation becomes painful or numb.
10. Turn it off before cleaning or charging.

The strongest placement is not necessarily directly over the most sensitive point. Some users may prefer to begin beside the clitoris or through thin underwear before moving to direct skin contact.

A good seal should feel secure but not painful. Do not force the silicone mouth against the body or continue if the skin becomes sore.

Adjustable pressure and suction patterns

Tenera 2 includes standard physical levels for use without a phone. The app allows the first three levels to be adjusted and supports unlimited additional suction patterns.

Pattern changes can include:

• Steady pressure pulses
• Gradual increases and decreases
• Short repeated bursts
• Alternating strong and gentle pulses
• Patterns containing deliberate pauses
• User-drawn custom sequences

Up to 10 user-created patterns can be saved through the programming section of the Lovense Remote app.

Lovense Remote app control

Tenera 2 can be operated directly with its physical controls or connected to the Lovense Remote app for more detailed control.

Current listed app functions include:

• Close-range Bluetooth control
• Internet-based long-distance partner control
• Touchscreen adjustment of suction intensity
• Customisable low, medium and high levels
• Unlimited suction patterns
• Storage of up to 10 user-created patterns
• Access to a library of shared patterns
• Control alongside other compatible Lovense toys

The app is optional for basic operation. It becomes most useful when the user wants precise intensity changes, custom rhythms or remote partner access.

Long-distance partner control

A consenting partner can control Tenera 2 through an internet connection from another room, city or country.

The person holding the toy connects it to their nearby phone through Bluetooth. Control can then be shared with an invited partner through Lovense Remote.

The controlling partner can change the pressure level and pattern in real time. The person using Tenera 2 can withdraw permission, end the remote session or turn the product off physically.

Pairing Tenera 2 with other Lovense toys

Lovense promotes Tenera 2 as part of a connected system. It can be operated alongside other compatible products through the Lovense Remote app.

Possible combinations include:

• Tenera 2 for clitoral air-pulse stimulation with Lush for internal G-spot vibration
• Tenera 2 with Gemini for simultaneous clitoral and nipple stimulation
• Tenera 2 with Ferri for two forms of external clitoral stimulation
• Tenera 2 with a compatible partner toy during long-distance play
• Several compatible toys controlled from the same app session

Additional toys are sold separately unless the current merchant listing clearly identifies a bundle.

Manual use without a phone

A phone is not required for basic operation.

Press and hold the physical power button firmly for approximately three to five seconds. The product gives a brief response when it turns on.

Short button presses cycle through its standard levels and stored patterns. The app is required for advanced programming and long-distance control.

Manual operation is useful when the phone battery is low, the app is unavailable or the user prefers a simple session without creating an account.

Handheld rather than wearable

Tenera 2 is a handheld external stimulator. It does not include a panty magnet, strap, suction base or anatomical support that holds it against the body.

App control changes the air pulses without repeated button presses, but the product still needs to be held or supported against the target area.

The curved body and narrower lower section are designed to make the product easier to grip while the mouth remains positioned against the skin.

Lovense Tenera 2 dimensions

The official Lovense measurement diagram lists the following approximate dimensions:

• Overall height: 127.4 mm or 5.01 inches
• Maximum front body width: 44 mm or 1.73 inches
• Maximum side depth near the head: 60.9 mm or 2.40 inches
• Lower handle thickness: 23.7 mm or 0.93 inches
• Mouth assembly width: approximately 21.8 mm or 0.86 inches
• Mouth assembly height: approximately 26.2 mm or 1.03 inches
• Product weight: approximately 105.6 grams

It is compact enough to hold in one hand but larger than a lipstick bullet vibrator. The curved five-inch body provides room for the air-pulse mechanism, rechargeable battery and ergonomic grip.

Who is the Lovense Tenera 2 suited for?

Is Tenera 2 suitable for beginners?

Tenera 2 can be a practical beginner product because it is used externally and does not require vaginal or anal insertion.

The strongest suction-style settings may nevertheless feel intense. A first-time user should begin at the lowest level, place the mouth slightly beside the clitoris and use only light pressure.

The app is optional. A beginner can first learn the standard physical controls and add custom patterns or partner control later.

Users who are extremely sensitive may also begin through thin underwear or interrupt the seal periodically rather than keeping the mouth stationary.

Using Tenera 2 during partnered play

The compact handheld body can be used during foreplay, mutual stimulation or sexual positions where one partner can maintain contact with the external clitoral area.

A partner can control the device through the physical buttons or the app while the other person positions it.

The product may be easier to position than a large wand vibrator because its head and handle occupy less space between bodies. Actual access will still depend on anatomy and sexual position.

Tenera 2 should not be trapped between bodies in a way that creates painful pressure or prevents the user from moving it away quickly.

External use only

Tenera 2 is designed for external stimulation. Its air-pulse mouth should be placed against external skin rather than inserted into the vagina or rectum.

The curved lower body is a handle containing electronic components. It is not an insertable vibrator or anal toy.

Anyone wanting internal stimulation should combine it with a separate product designed and approved for that use.

How quiet is the Lovense Tenera 2?

Lovense publishes a maximum noise level of approximately 43 dB.

Actual sound can vary according to the selected level, whether the mouth has formed a seal, the amount of body contact and the surrounding room.

A good seal may change the sound compared with holding the device in open air. Lower settings will generally be less noticeable than maximum power.

The product is comparatively quiet, but it should not be described as silent.

IPX7 waterproof construction

Tenera 2 has an IPX7 waterproof rating. Lovense states that it can be used in a shower or bath and submerged in up to one metre of water for up to 30 minutes.

The waterproof body also supports the manufacturer’s cleaning method, which involves operating the product at its highest level while submerged in clean water.

Lovense warns that Bluetooth connectivity may be unstable when the product or phone is in or under water. Physical-button operation may therefore be more reliable during bath use.

Battery life and charging

Lovense lists up to approximately one hour and 18 minutes of operating time.

Actual battery duration depends on the selected suction level, pattern, wireless connection and battery condition. Strong continuous settings will normally use power more quickly than lower or intermittent patterns.

A full charge takes approximately 70 minutes. The indicator remains illuminated while charging and turns off when the battery is full.

The app can display the remaining battery level when the device is connected.

How to clean the Lovense Tenera 2

Clean Tenera 2 before and after every use.

Lovense’s official cleaning method is:

1. Disconnect the magnetic charging cable.
2. Rinse visible lubricant or residue from the silicone exterior.
3. Turn Tenera 2 on and select its highest level.
4. Submerge it in clean water for approximately one minute.
5. Allow the active airflow system to move water through the mouth area.
6. Turn the product off and remove it from the water.
7. Rinse away any remaining residue.
8. Dry the entire product thoroughly.
9. Allow it to air-dry before charging or storage.
10. Store it away from extreme heat and cold.

Use water-based lubricant only

Lovense instructs users to use water-based lubricant with Tenera 2 and avoid silicone-based or oil-based products.

A small amount around the silicone mouth can:

• Improve the seal between the rim and skin
• Reduce dragging when repositioning the product
• Make the pressure pulses feel more consistent
• Improve comfort during longer sessions

Water-based lubricant may dry during use. Reapply it when the rim begins to drag or the seal becomes inconsistent.

Avoid filling the mouth with excessive lubricant. A thin coating around the rim is usually sufficient for external positioning.

Phone and computer compatibility

The current Lovense guide lists compatibility with:

• Compatible iPhone, iPad and iPod Touch devices using iOS 14.2 or later
• Android 5.0 or later with Bluetooth 4.0 enabled
• Compatible Mac computers with Bluetooth 4.0 enabled
• Windows computers using the separately available Lovense USB Bluetooth Adapter

App and operating-system requirements can change. Buyers using older equipment should review the current requirements before ordering.

What is included with Lovense Tenera 2?

The current standard product listing includes:

• One Lovense Tenera 2 app-controlled clitoral stimulator
• One magnetic USB charging cable
• One user manual

Water-based lubricant, toy cleaner, storage accessories, additional Lovense toys and the Windows USB Bluetooth Adapter are normally sold separately unless the current offer identifies a bundle.

Tenera 2 compared with other external vibrator styles

Important considerations before buying

Overall assessment

The Lovense Tenera 2 provides a distinctly different sensation from a conventional clitoral vibrator. Its air-pressure pulses stimulate around the clitoral area instead of relying solely on a solid vibrating surface.

Its strongest features are the redesigned PulseSense airflow system, wide silicone mouth, strong adjustable pressure, comparatively quiet operation, waterproof construction and extensive long-distance app controls.

Its principal limitations are that it must be held in position, requires a reasonably good seal and provides less than 80 minutes of maximum published operating time.

Tenera 2 is best suited to adults who want focused suction-style stimulation, particularly those who find direct vibration too numbing or who value custom patterns and remote partner control.

Frequently asked questions

What makes the Lovense Lush 3 different?

Lush 3 combines strong internal vibration with a wearable shape and extensive wireless controls. The fixed tail is firmer than the tails on earlier Lush generations, helping the bulb remain positioned while also keeping the Bluetooth antenna outside the body. The Lovense Remote app adds precise intensity control, unlimited patterns, music and sound response, nearby partner play and internet-based long-distance access.

Lovense Lush 3 at a glance

How does Lovense Lush 3 work?

The rounded bulb is inserted vaginally while the curved tail remains outside the body. The bulb contains the vibration motor and is shaped to rest against or close to the front vaginal wall.

The external tail serves several practical purposes:

• It keeps the physical control accessible.
• It contains the Bluetooth antenna outside the body.
• It carries the magnetic charging contacts.
• It assists with positioning and removal.
• Its fixed shape helps support the internal bulb.

Lush 3 provides vibration only. It does not thrust, rotate, oscillate, heat or change its physical shape automatically.

Targeted internal G-spot vibration

The insertable bulb has an asymmetrical rounded shape intended to sit against the front vaginal wall. Its motor delivers up to approximately 7,000 vibrations per minute.

How accurately it reaches the preferred area depends on:

• Individual anatomy
• Insertion depth
• The direction of the bulb’s broader surface
• The angle of the fixed tail
• Pelvic muscle tone
• Body position
• The amount of lubricant used

The most effective position may not be the deepest position. Small changes in depth or angle can move the motor closer to the preferred internal area.

Can Lush 3 be worn hands-free?

Lush 3 is designed to remain inserted without being held continuously. The bulb sits internally and the fixed tail curves around the external anatomy.

Wearable stability varies according to:

• Body shape
• Pelvic-floor muscle tone
• Insertion angle
• Underwear fit
• Whether the user is lying, sitting, standing or walking
• The amount of movement involved

Close-fitting underwear may help support the tail and reduce movement. Lush 3 may remain more stable during gentle activity than during running, gym exercise or large changes in position.

Test the fit privately before relying on it as a wearable product. The user should always remain able to reach the tail and remove the vibrator comfortably.

Does the Lush 3 tail stimulate the clitoris?

Lush 3 has one primary motor inside the insertable bulb. Its external tail is principally a control, antenna, charging and positioning component.

The tail may transmit residual vibration to the vulva depending on its position, but it does not contain a dedicated clitoral motor and should not be described as a dual-motor rabbit vibrator.

Users wanting strong direct external stimulation may combine Lush 3 with:

• A compact external vibrator
• A bullet vibrator
• A wand vibrator
• A wearable magnetic panty vibrator such as Lovense Ferri
• Another compatible Lovense product controlled in the same app session

How to insert and position Lush 3

1. Charge and clean Lush 3 before its first use.
2. Apply generous water-based lubricant to the bulb and vaginal opening.
3. Make sure the vibrator is switched off before insertion.
4. Insert the smooth rounded bulb slowly.
5. Direct its broader surface toward the front vaginal wall.
6. Leave the complete tail outside the body.
7. Activate the lowest steady level.
8. Adjust depth and angle gradually.
9. Increase intensity only after confirming that the fit is comfortable.
10. Turn it off before removal.

Remove Lush 3 by relaxing the pelvic muscles and guiding the toy out slowly by its body and tail. Do not pull sharply or twist the fixed tail aggressively.

Physical controls without a phone

Lush 3 can be used without the app.

The current user manual shows the following operation:

• Press and hold the button for approximately three seconds to turn it on.
• Press and hold again to turn it off.
• Tap the button to cycle through the factory vibration settings.
• The standard sequence contains three steady levels and four changing patterns.

The factory controls are useful when a phone is unavailable, Bluetooth is disconnected or an immediate manual change is required.

The app is needed for precise touchscreen control, custom patterns, music response, sound response and long-distance partner access.

Lovense Remote app control

Lush 3 connects to the Lovense Remote app on a compatible phone, tablet or computer.

Current app functions include:

• Close-range Bluetooth control
• Internet-based long-distance control
• Touchscreen intensity adjustment
• Customisable low, medium and high levels
• Unlimited user-created vibration patterns
• Access to patterns shared by other Lovense users
• Music-synchronised vibration
• Sound-responsive vibration
• Alarm-based vibration
• Speed-based control on supported phones
• Control of multiple compatible Lovense products
• Control Links that can be shared with another consenting adult

The app allows gradual rises, drops, pulses and irregular patterns that cannot be created using the physical button alone.

Long-distance partner control

A consenting partner can control Lush 3 from another room, city or country through an internet connection.

The wearer’s phone remains physically connected to Lush 3 through Bluetooth. The partner connects to the wearer through the Lovense Remote internet service.

Long-distance options include:

• Adding a partner as a Lovense contact
• Live real-time control
• Control during text, audio or video communication
• Sharing a temporary Control Link
• Setting individual control permissions

The person wearing Lush 3 can stop the connection, withdraw control, change permissions or turn the toy off physically.

Bluetooth range and connection reliability

Lovense lists an outdoor Bluetooth range of up to approximately 75 metres for Lush 3 under favourable conditions.

This should not be interpreted as a guaranteed indoor range. Connection distance can be reduced by:

• The body blocking the signal
• Walls, floors and furniture
• Dense or layered clothing
• The phone being placed in a bag or rear pocket
• Other wireless devices
• A weak phone antenna
• Low battery levels

The external tail helps by keeping the antenna outside the body. For the strongest nearby connection, keep the phone on the same side of the body as the tail and avoid covering it with dense objects.

Long-distance range is not limited by the 75-metre Bluetooth figure. Once the wearer’s phone is connected, the controlling partner can be anywhere with suitable internet access.

How quiet is Lovense Lush 3?

Lovense’s current comparison table lists a minimum noise level of approximately 38 dB. The main product copy describes a maximum volume of approximately 43 dB.

Actual perceived sound depends on:

• The selected intensity or pattern
• Whether the bulb is inserted
• Underwear and clothing
• Whether the tail touches a hard surface
• The level of background noise
• Individual hearing sensitivity

Insertion and soft clothing may muffle some sound, while contact between the tail and a chair or another firm object can make vibration more noticeable.

Lush 3 is designed for comparatively quiet operation, but it is not silent. Test it privately with the intended clothing before relying on discretion.

Music, sound, alarms and speed control

The Lovense Remote app can change Lush 3’s response according to several types of input.

Music mode

Music mode adjusts the vibration in response to compatible audio played through the connected device. Tracks with a clearly defined beat generally produce more noticeable changes.

Sound mode

Sound mode responds to audio detected through the phone or tablet microphone. This can include music, voices or other selected sounds.

Alarm mode

An alarm can be configured to activate a selected pattern at a chosen time. The toy must have sufficient battery and remain connected as required by the app.

Speed mode

On supported devices, movement speed can influence the vibration response. Availability depends on the connected device and current app version.

Interactive use with compatible Lovense products

Lush 3 can be controlled alongside other compatible Lovense products in the same app ecosystem.

Lovense promotes pairings such as Lush 3 with Max 2, allowing supported activity from the connected masturbator to influence the G-spot vibrator.

Compatibility and available syncing functions vary by:

• The second Lovense product
• The app and firmware versions
• The selected control mode
• The phone or computer being used
• Internet and Bluetooth stability

Additional toys, software and subscriptions are not included unless the current merchant offer expressly identifies a bundle.

Battery life and magnetic charging

Lovense currently lists up to approximately 220 minutes of use from a complete charge.

Actual battery duration depends on:

• Vibration intensity
• Whether the selected pattern contains pauses
• Bluetooth and internet use
• Battery age and condition
• Ambient temperature

The current product page and user manual specify approximately 80 minutes for a complete charge. Other Lovense material rounds this to approximately 85–90 minutes.

How to charge Lush 3

1. Turn the vibrator off.
2. Make sure the toy and charging contacts are completely dry.
3. Attach the supplied magnetic USB charging connector to the tail.
4. Connect the USB end to a suitable powered USB source.
5. A solid red light indicates that charging is in progress.
6. The red light turns off when charging is complete.
7. Disconnect the cable before using or washing the toy.

IPX7 waterproof construction

Lush 3 has an IPX7 waterproof rating. It can be washed under running water and used in a bath or shower according to the manufacturer’s instructions.

Water can interfere with Bluetooth signals, so app control may be less reliable when the toy or phone is submerged. The physical button may be more dependable during wet use.

Inspect the silicone regularly and stop using the product if the surface develops a tear, split or exposed internal component.

How to clean Lovense Lush 3

Clean Lush 3 before and after every use.

1. Turn the vibrator off.
2. Disconnect the magnetic charging cable.
3. Rinse the silicone-covered body with warm water.
4. Apply mild unscented soap or a compatible sex-toy cleaner.
5. Clean the bulb, curved neck, tail, button and charging contacts.
6. Rinse away all cleaner and lubricant residue.
7. Dry it with a clean, lint-free cloth.
8. Allow it to air-dry completely before charging or storage.
9. Store it away from extreme heat, cold and prolonged sunlight.

Do not boil Lush 3 or place it in a dishwasher. Its rechargeable battery and electronic components are not designed for heat sterilisation.

The current manual describes Lush 3 as a personal-use product and advises against sharing it to reduce the risk of infection.

Use water-based lubricant only

Lovense specifically instructs users to use water-based lubricant and avoid silicone-based and oil-based products.

Apply lubricant generously to:

• The complete insertable bulb
• The narrow curved neck where it contacts the body
• The vaginal opening

Water-based lubricant can dry during extended use. Pause and reapply it whenever the silicone begins to drag or insertion becomes less comfortable.

Avoid applying excessive lubricant to the external button and magnetic charging contacts.

Phone and computer compatibility

The current official guide lists compatibility with:

• Compatible iPhone, iPad and iPod Touch devices using iOS 14.2 or later
• Android 5.0 or later with Bluetooth 4.0 enabled
• Compatible Mac computers with Bluetooth 4.0 enabled
• Windows computers using the separately available Lovense USB Bluetooth Adapter

Operating-system and app requirements can change. Buyers using older equipment should check the current compatibility information before ordering.

What is included with Lovense Lush 3?

The current standard listing expressly includes:

• One Lovense Lush 3 Bluetooth remote-control vibrator
• One magnetic USB charging cable
• One user manual

Older Lovense material has shown a storage pouch with some Lush 3 packages. The current product-page contents do not expressly include one, so buyers should not assume that a pouch is supplied.

Water-based lubricant, toy cleaner, the Windows USB Bluetooth Adapter and other Lovense toys are normally sold separately unless the current offer identifies a bundle.

Lush 3 compared with Lush 4 and Lush Mini

Who is Lovense Lush 3 suited for?

Is Lush 3 suitable for beginners?

Lush 3 may suit a beginner who is already comfortable with vaginal insertion and wants a wearable internal vibrator.

A cautious first session should involve:

• Generous water-based lubricant
• Insertion while the toy is switched off
• The lowest steady setting
• Private testing before wearable use
• Short sessions initially
• Immediate repositioning if the fixed tail presses uncomfortably

Someone entirely new to insertion may prefer the smaller Lush Mini or a slim stationary vibrator before choosing a full-sized wearable G-spot egg.

Is Lush 3 intended for anal use?

No. Lush 3 is designed for vaginal G-spot stimulation.

Its curved tail is not a secure flared anal-toy base. The bulb and tail should not be inserted rectally.

Choose a purpose-designed anal vibrator with a broad non-insertable base when anal stimulation is required.

Important considerations before buying

Overall assessment

Lovense Lush 3 remains a capable wearable G-spot vibrator despite the release of newer Lush models. Its fixed-tail design, strong internal motor and comprehensive app controls make it suitable for solo use, nearby partner play and long-distance relationships.

Its strongest features are its up-to-7,000-vibration-per-minute motor, comparatively quiet operation, 220-minute maximum battery claim, IPX7 construction and extensive Lovense Remote ecosystem.

Its principal limitations are the absence of a dedicated clitoral motor, slower charging and shorter Bluetooth range than Lush 4, and a fixed shape that will not fit every body equally well.

Lush 3 is best suited to adults wanting a proven, app-controlled internal vibrator and who do not require the faster charging, LED tail or connection upgrades of the latest generation.

Frequently asked questions

What makes Fleshskins Grip different?

A traditional Fleshlight places the soft sleeve inside a rigid plastic housing. Fleshskins Grip is used without that case, allowing the hand to compress the sleeve directly. A gentle grip creates a looser, faster stroke, while squeezing more firmly narrows the internal tunnel and increases pressure around the shaft.

Fleshskins Grip Blue Ice at a glance

How does Fleshskins Grip Blue Ice work?

Fleshskins Grip is entirely manual. The penis is inserted through either open end and the sleeve is moved backward and forward by hand.

The user can change the sensation through:

• Stroke speed
• Stroke length
• Hand pressure
• Finger position
• The amount of lubricant
• Rotating the sleeve during movement
• Compressing different parts of the internal texture

Because there is no rigid case, pressure from the hand is transferred directly through the soft sleeve. This allows rapid changes from a loose glide to a tighter squeeze without adjusting an end cap or stopping the session.

What does caseless mean?

Caseless means the soft SuperSkin sleeve is used directly rather than being inserted into a hard flashlight-shaped housing.

Removing the case provides several practical advantages:

• Direct squeeze control
• Less bulk in the hand
• Lower overall weight
• More flexibility around different penis girths
• Easier access to both ends of the internal tunnel
• Faster rinsing and drying
• Easier use by a partner

The trade-off is that there is no rigid housing to protect the TPE during storage. The soft sleeve must be kept away from sharp objects, lint, dust and incompatible materials.

Adjustable tightness through hand pressure

The main control mechanism is the user’s grip.

Pressure can also be concentrated on one section rather than applied evenly. For example, the user can squeeze near the entrance, middle or opposite end to emphasise different parts of the internal texture.

Four built-in finger holes

One side of the sleeve contains four large finger openings. These function like a handle and help prevent the soft sleeve from slipping out of the hand.

The finger openings may be particularly useful when:

• A generous amount of lubricant is being used
• The user wants to squeeze the sleeve with the palm
• A partner is controlling the stroking movement
• The product is being moved quickly
• The user has difficulty gripping a smooth conventional sleeve

Hand size varies. Users with particularly large fingers should insert them slowly and avoid forcing them through the openings.

Textured internal stimulation tunnel

The Blue Ice tunnel contains several changing textures rather than one smooth internal surface.

The current listing identifies:

• Rounded pressure nubs
• Raised ribs
• Flexible ticklers
• Small teasing projections
• Narrower and wider internal sections

The internal sensation changes according to which part of the sleeve is squeezed. Pressing directly over a section of raised nubs increases its contact, while squeezing between texture zones can create a temporary constriction.

Advantages of the open-ended design

Both ends of Fleshskins Grip are open. This differs from a closed sleeve that stops the penis at a fixed internal depth.

The open-ended layout provides:

• Accommodation for a wider range of penis lengths
• Access to the complete shaft
• The option to stroke past the tip
• Airflow through the internal tunnel
• Easier application of lubricant from either end
• Faster flushing during cleaning
• Better ventilation while drying
• Potential combination with consensual oral or manual stimulation

The open design does not create the same sealed vacuum as a capped Fleshlight. The main adjustable sensation comes from squeezing rather than suction.

Fleshskins Grip size and fit

The current product specification lists:

• Length: 5.75 inches or approximately 14.6 cm
• Maximum listed width: 2.75 inches or approximately 7 cm

The listed width measures the uncompressed external body rather than a rigid internal diameter.

The SuperSkin material stretches to accommodate different penis lengths and girths. Because the sleeve is open-ended, a penis longer than 5.75 inches can extend beyond the opposite end rather than being limited by a closed tunnel.

How to use Fleshskins Grip Blue Ice

1. Inspect the sleeve for tears, cuts, residue or damage.
2. Confirm that it is clean and completely dry.
3. Apply generous compatible lubricant to the penis.
4. Apply lubricant around the chosen sleeve entrance.
5. Add a small amount inside the first section of the tunnel.
6. Place the fingers through the built-in grip holes.
7. Insert slowly while keeping the hand relaxed.
8. Begin with a light grip and short strokes.
9. Increase stroke length gradually.
10. Squeeze gently when greater pressure is desired.
11. Rotate or bend the sleeve slightly to explore different textures.
12. Pause and reapply lubricant whenever friction increases.
13. Reduce pressure before removing the sleeve.
14. Wash and dry it immediately after use.

The sleeve contains no motor or automatic movement. The user or partner controls all speed, pressure, positioning and stroke depth.

What lubricant can be used?

The current Adam & Eve listing specifically describes Fleshskins Grip Blue Ice as compatible with:

• Water-based lubricant
• Silicone-based lubricant

This model-specific guidance differs from the water-based-only advice commonly supplied with some other Fleshlight products. Follow the instructions included with the current Blue Ice product and check any future listing changes.

Water-based lubricant is easier to rinse from the textured tunnel but may need to be reapplied during longer sessions. Silicone-based lubricant generally remains slippery for longer but may require more thorough washing.

Using Fleshskins Grip with a partner

The caseless body and finger holes make this model particularly suitable for consensual partnered use.

A partner can control:

• Stroke speed
• Stroke depth
• Squeeze pressure
• Rotation
• The position of the textured zones

The open end can also leave part of the penis accessible for compatible consensual manual or oral stimulation.

Partnered use should begin slowly because the person holding the sleeve cannot directly feel how much pressure is being applied internally. Communicate continuously and stop immediately if the user reports pain, pinching or numbness.

How to clean Fleshskins Grip Blue Ice

Clean the sleeve after every use.

1. Rinse the exterior and both sleeve openings with warm water.
2. Flush warm water completely through the open-ended tunnel.
3. Apply a sex-toy cleaner identified as compatible with TPE or SuperSkin.
4. Gently work cleaner into the finger holes and external folds.
5. Move clean water through all internal texture zones.
6. Rinse repeatedly until lubricant and cleaner residue are removed.
7. Shake out excess water without stretching the sleeve aggressively.
8. Pat the exterior with a clean, lint-free cloth.
9. Place it on the included drying stand.
10. Allow the complete internal tunnel to air-dry.
11. Do not return it to enclosed storage until fully dry.

The current merchant instructions specify warm water and sex-toy cleaner. Avoid bleach, alcohol, strong detergents and harsh household cleaning products unless the manufacturer provides specific approval.

Included ABS drying stand

The package includes an ABS plastic stand designed to hold the sleeve upright while air passes through the open tunnel.

How to use the stand

1. Rinse the sleeve thoroughly.
2. Shake out as much water as possible.
3. Pat the exterior with a lint-free cloth.
4. Place the sleeve upright on the stand.
5. Position it in a clean, well-ventilated area.
6. Keep it away from direct sunlight and heaters.
7. Allow both the sleeve and stand to dry completely.

Drying time varies with room temperature, humidity and the amount of water remaining in the texture. Do not assume the centre is dry merely because the outside feels dry.

Caring for the SuperSkin TPE

SuperSkin is soft and highly stretchable, but it requires more careful storage than a rigid silicone product.

To prolong its useful life:

• Wash it promptly after every use.
• Allow it to dry completely.
• Keep it away from dust, pet hair and lint.
• Avoid contact with sharp jewellery and fingernails.
• Do not leave it compressed under heavy objects.
• Keep it away from extreme heat and direct sunlight.
• Do not store it touching unrelated soft-plastic or rubber toys.
• Inspect it regularly for tears and surface deterioration.

Replace the sleeve if it develops deep tears, permanent unpleasant odour, contamination that cannot be removed or extensive surface breakdown.

Does it require renewing powder?

The current Adam & Eve product instructions do not expressly state that renewing powder is included or required.

Some TPE sleeves can become tackier after repeated washing. A compatible Fleshlight renewal product may help maintain the surface, but it should only be applied after the sleeve is completely dry and according to the product instructions.

Do not substitute talcum powder, fragranced body powder or an unknown household powder.

No batteries, motor or app

Fleshskins Grip contains no electronics.

This means there is:

• No charging time
• No replaceable battery
• No powered vibration
• No automatic stroking
• No app or Bluetooth connection
• No motor noise
• No mechanical parts to maintain

The disadvantage is that all movement and pressure must be supplied by the user or partner.

Is Fleshskins Grip waterproof?

The product has no electronic components and can be washed thoroughly with warm water. However, the current listing does not give it a formal waterproof or submersible rating.

It should therefore be described as washable rather than marketed with a specific IP waterproof rating.

The merchant does not expressly promote this product for bath or shower use. Follow the instructions included with the current product when wet use is important.

Who is Fleshskins Grip Blue Ice suited for?

Is Fleshskins Grip suitable for beginners?

It can be suitable for beginners because it is manually controlled, contains no complicated electronics and allows tightness to be reduced immediately by relaxing the hand.

Its internal texture is more stimulating than a basic smooth sleeve, so a first-time user should:

• Use generous lubricant
• Begin with a loose grip
• Use slow, short strokes
• Avoid squeezing directly over the most intense texture initially
• Learn the cleaning and drying routine before storage

Fleshskins Grip compared with other stroker styles

What is included?

The current listing expressly includes:

• One Fleshlight Fleshskins Grip Blue Ice caseless stroker
• One ABS plastic drying stand

Lubricant, toy cleaner and renewing powder should be treated as separate purchases unless the current merchant offer expressly identifies a bundle.

Important considerations before buying

Overall assessment

Fleshlight Fleshskins Grip Blue Ice provides a more direct and flexible experience than a conventional cased Fleshlight. Its caseless body lets the user change tightness instantly by squeezing, while the finger openings address one of the common problems with small lubricated sleeves: maintaining a secure grip.

Its strongest features are its compact size, open-ended design, strong internal texture, stretchable SuperSkin material, finger-hole grip and included drying stand.

Its main compromises are the absence of sealed suction, reduced storage protection, complete dependence on manual movement and the care requirements of soft TPE.

Fleshskins Grip is best suited to adults wanting a small manual sleeve with direct squeeze control and easier cleaning than a traditional full-sized cased masturbator.

Frequently asked questions

What makes the Ultimate Milker 2 different?

The internal mechanism creates a spiralling or gyrating action around the shaft instead of simply vibrating a stationary sleeve. A separate vibrator concentrates additional stimulation near the head of the penis. The two powered sensations can be explored in different combinations, while the suction-cup base supports mounted use on a suitable flat surface.

Ultimate Milker 2 at a glance

How does the PDX Elite Ultimate Milker 2 work?

The penis is inserted through the circular sleeve entrance and into the soft textured tunnel. An internal powered mechanism then creates spiralling, revolving and gyrating pressure around the shaft.

A second powered component supplies vibration near the deeper end of the sleeve, concentrating additional stimulation around the head of the penis.

The user can adjust the experience through:

• Seven gyrating modes
• Reversing the gyration direction
• 10 vibration settings
• Using gyration without vibration
• Using vibration without gyration
• Combining both powered functions
• Manually moving the product along the shaft
• Mounting it on a suitable surface

Seven reversible gyrating modes

The principal mechanism creates circular and spiralling movement around the penis. The manufacturer refers to this as rotational milker technology.

The seven modes may vary the rhythm, duration and sequence of the revolving action. The current listing does not provide a separate descriptive name for every mode.

Reversing direction changes how the internal ribs and raised textures move across the skin. One direction may feel more comfortable than the other depending on anatomy, insertion depth and lubrication.

Does the Ultimate Milker 2 stroke automatically?

No. The powered mechanism rotates and gyrates around the shaft, but it does not automatically move the complete sleeve in and out.

Automatic movement includes:

• Circular and spiralling sleeve action
• Changing gyration rhythms
• Reversible direction
• Vibration near the internal tip

Movement that remains manual includes:

• Insertion and removal
• Changing stroke depth
• Moving the complete unit along the shaft
• Moving the body against the mounted device

Buyers specifically seeking powered in-and-out motion should compare it with a telescoping or thrusting masturbator.

10 vibration modes with targeted tip stimulation

A wired internal vibrator sits near the deeper end of the sleeve and focuses vibration towards the head of the penis.

The 10 settings provide a selection of vibration intensities or changing modes. The exact sequence is not individually described in the current product listing.

The vibration can be:

• Used by itself
• Combined with any preferred gyrating mode
• Changed without removing the penis
• Switched off when only rotational stimulation is wanted

Because the vibration is concentrated near the sleeve tip, a user who does not reach the full five-inch depth may feel less direct contact with that component.

Removable multi-ribbed TPE sleeve

The internal sleeve is made from soft, stretchy TPE and contains multiple raised ribs and nubby texture zones.

The sleeve performs several functions:

• Provides the soft contact surface around the penis
• Transfers the gyrating mechanism’s movement to the skin
• Creates additional texture during manual stroking
• Holds the wired vibrator near the internal tip
• Can be removed for washing
• Can be used separately as a manual sleeve

Removing the sleeve requires care because the wired vibrator must be separated from it without pulling or damaging the wire.

Illuminated physical controls

The Ultimate Milker 2 uses buttons on the outer housing rather than a smartphone app or wireless remote.

The manufacturer’s general control instructions are:

• Press and hold the power control for approximately three seconds to switch the product on.
• Press the relevant milker control to cycle through seven gyrating functions.
• Use the vibration control to move through 10 vibration modes or levels.
• Use the direction control to reverse the gyrating movement where provided.
• Connect the supplied wired earbuds and press the speaker control to activate the prerecorded audio.
• Press and hold the designated power or vibration control for approximately three seconds to switch the unit off.

Follow the supplied quick-start guide because the exact button symbols should take priority over a third-party description.

The controls illuminate during operation, which can make them easier to identify in a dim room.

Adjustable suction-cup base for mounted use

The package includes a removable, adjustable and locking suction-cup base. It is intended to stabilise the product on a suitable smooth surface.

Compatible surfaces are generally:

• Smooth
• Clean
• Dry
• Flat
• Non-porous
• Strong enough to withstand movement

Textured tiles, grout, unfinished timber, fabric, soft furniture and porous surfaces may not maintain a reliable seal.

How to test the mounting base

1. Clean and dry the mounting surface.
2. Inspect the suction cup for dust, damage or residue.
3. Attach and lock the mount according to its instructions.
4. Pull gently on the product before use.
5. Apply increasing pressure gradually.
6. Stop if the base shifts, lifts or loses suction.

Optional erotic audio and LED lighting

The Ultimate Milker 2 includes prerecorded adult audio that can be heard through the supplied wired earbuds.

The audio is optional. Users can operate the gyration and vibration without connecting the earbuds or activating the sound function.

The transparent viewing panel allows the user or partner to see parts of the internal action. Coloured LED lights illuminate the window during operation.

The lights and audio do not change the mechanical stimulation. They are sensory and visual additions rather than separate movement systems.

Size, tunnel depth and fit

The official manufacturer specification lists:

• Overall length: approximately 10.6 inches or 27 cm
• Overall width: approximately 3.3 inches or 8.4 cm
• Penetrable length: approximately 5 inches or 12.7 cm
• Tunnel diameter: approximately 2 inches or 5.1 cm

Adam & Eve rounds the overall length to 10.5 inches. This is a minor measuring or rounding difference rather than a meaningful change in product size.

The two-inch tunnel figure should not be treated as a rigid maximum. The TPE sleeve is flexible and stretchable, but the mechanism and hard outer housing limit how far it can expand.

The manufacturer does not provide a guaranteed maximum penis circumference. Users with greater girth should begin with generous lubricant and avoid forcing the sleeve.

How to use the Ultimate Milker 2

1. Fully charge the product before the first session.
2. Inspect the sleeve, housing, wired vibrator and suction-cup base.
3. Confirm that the sleeve is clean, completely dry and correctly installed.
4. Apply generous water-based lubricant to the penis.
5. Apply additional water-based lubricant to the sleeve entrance.
6. Insert slowly while all powered functions are switched off.
7. Activate a lower gyrating setting.
8. Test the direction and change it when desired.
9. Add a lower vibration mode after confirming that the rotating action is comfortable.
10. Increase only one function at a time.
11. Add manual stroking or body movement when desired.
12. Reapply lubricant whenever the sleeve begins to drag.
13. Switch off both powered systems before removal.
14. Remove the sleeve carefully for cleaning.

Do not insert the penis when the sleeve is dry, damaged, incorrectly fitted or partially detached from the mechanism.

Stop immediately if use causes pinching, sharp pain, skin injury, numbness, swelling or persistent discomfort.

Use water-based lubricant only

The manufacturer and Adam & Eve specify water-based lubricant for the Ultimate Milker 2.

Water-based lubricant is important because:

• The rotating sleeve creates repeated friction.
• The multi-ribbed texture increases skin contact.
• The tunnel surrounds the shaft closely.
• Manual movement adds further rubbing.
• Insufficient lubrication may strain the soft sleeve.

Do not use silicone-based or oil-based lubricant unless Pipedream later provides written approval for this exact model.

Water-based lubricant may dry during longer sessions. Pause and reapply it rather than increasing force against a dragging sleeve.

Battery life and magnetic USB charging

The official specifications list:

• Battery: rechargeable lithium-ion
• Maximum operating time: approximately 120 minutes
• Full charging time: approximately 240 minutes
• Charging connection: magnetic USB-A cable

Actual operating time may vary with:

• Gyration mode
• Vibration strength
• Whether both motors operate together
• Audio and LED use
• Battery age and condition

Charging precautions

• Turn the product off before charging.
• Make sure the charging contacts are clean and dry.
• Use the supplied magnetic USB cable.
• Keep the product away from water while charging.
• Do not use the product while it is connected to power.
• Disconnect the cable after charging is complete.

A four-hour charge is relatively long. Charge it well before the intended session rather than relying on a short last-minute connection.

IPX0: the main unit is not waterproof

The official specification gives the Ultimate Milker 2 an IPX0 rating. This means the electronic housing has no formal protection against water ingress.

Do not:

• Submerge the complete product
• Use it in a bath or shower
• Rinse the motorised housing under a tap
• Allow water to enter the controls or audio port
• Connect the charger while any component is wet

How to clean the Ultimate Milker 2

The internal sleeve should be cleaned after every use.

1. Turn the product off and disconnect the charger and earbuds.
2. Slowly remove the TPE sleeve from the housing.
3. Carefully release the wired internal vibrator from the sleeve.
4. Keep the electronic housing and wired component dry.
5. Rinse the removed TPE sleeve with warm water.
6. Use mild soap or an antibacterial sex-toy cleaner compatible with TPE.
7. Work water gently through the multi-ribbed internal texture.
8. Rinse until all lubricant and cleaner residue are removed.
9. Shake out excess water without stretching the sleeve aggressively.
10. Allow the sleeve to air-dry completely.
11. Wipe the ABS housing with a slightly damp cloth when necessary.
12. Reassemble only when every washable part is dry.

Do not boil the sleeve, place any component in a dishwasher or use bleach, alcohol or harsh household cleaners.

Using the sleeve separately

The removable sleeve can be used independently as a manual stroker.

Without the powered housing:

• The user controls all movement by hand.
• Pressure can be changed by squeezing the TPE.
• The sleeve is lighter and easier to reposition.
• The gyrating mechanism is not available.
• The wired tip vibrator must be removed unless the manufacturer’s instructions permit separate powered use.

Avoid twisting, stretching or turning the sleeve inside out aggressively because this may tear the soft material.

Noise and discretion

The Ultimate Milker 2 contains a comparatively strong gyrating motor, a separate vibration system, LEDs and optional audio.

The manufacturer does not publish a formal decibel rating. It should not be assumed to be silent or suitable for use in a quiet shared room.

Noise may increase when:

• Faster gyrating modes are selected
• Strong vibration is added
• The suction-cup base transfers movement into furniture
• The sleeve is incorrectly seated
• The housing touches a wall or hard surface

Using the supplied earbuds keeps the prerecorded audio private, but it does not reduce the mechanical sound produced by the motors.

Using the Ultimate Milker 2 with a partner

A consenting partner can:

• Hold and position the housing
• Change gyration and vibration settings
• Reverse the rotating action
• Provide additional manual strokes
• Help monitor the suction-cup mounting base

The person receiving stimulation should explain how to stop the product and communicate immediately if a setting causes pinching or excessive pressure.

The TPE sleeve is best treated as a personal-use component and should not be shared between multiple users.

Who is the Ultimate Milker 2 suited for?

Is the Ultimate Milker 2 suitable for beginners?

It can be used by a beginner, but it is considerably more complex and intense than a basic manual sleeve.

A cautious first session should involve:

• Generous water-based lubricant
• Insertion with all functions switched off
• Testing the gyration by itself
• Using a lower-speed mode
• Adding gentle vibration only after becoming comfortable
• Keeping the product handheld rather than mounted initially
• Learning how to stop both functions quickly

A small manual stroker may be easier for someone wanting the simplest possible introduction to male masturbators.

Ultimate Milker 2 compared with other masturbator styles

What is included?

The current official package list includes:

• One PDX Elite Ultimate Milker 2
• One soft nubby removable sleeve
• One storage cap
• One adjustable suction-cup base
• One set of wired earbuds
• One magnetic USB charging cord

Adam & Eve also references a quick-start guide. Check the current physical package for printed instructions and warranty documentation.

Water-based lubricant and compatible toy cleaner should be treated as separate purchases unless the current offer expressly includes them.

Important considerations before buying

Overall assessment

The PDX Elite Ultimate Milker 2 is a mechanically unusual masturbator because it combines revolving pressure around the shaft with separate vibration concentrated near the penis head.

Its strongest features are the seven reversible gyrating modes, 10 vibration choices, removable textured sleeve, adjustable mounting base and optional audio-visual effects.

Its principal compromises are its bulky housing, mechanical noise, four-hour charging time, IPX0 construction and the absence of true automatic in-and-out stroking.

It is best suited to adults wanting rotating or twisting stimulation rather than a conventional vibration-only sleeve, and who are prepared to follow the detailed sleeve-removal and cleaning process.

Frequently asked questions

What makes Adam’s Trainer different?

The distinguishing feature is its exclusive internal tunnel. Instead of using one repeated texture, the sleeve progresses through four intensity chambers containing ridges, nubs, ticklers and narrower transitions. The transparent case is shorter and lighter than a traditional full-sized Fleshlight case, while its adjustable cap lets the user alter airflow and suction.

Adam’s Trainer at a glance

How does Adam’s Trainer by Fleshlight work?

Adam’s Trainer is entirely hand-operated. The penis is inserted through the swirl-shaped entrance and into the textured internal tunnel. The user then moves the complete case backward and forward manually.

As the sleeve moves, its changing ridges, chambers and flexible projections create different pressure points along the shaft. Air is also displaced through the open end of the sleeve and adjustable base cap, producing suction when the airflow is restricted.

The experience can be adjusted through:

• Stroke speed
• Stroke length
• Grip pressure on the transparent case
• The amount and viscosity of lubricant
• The tightness of the adjustable end cap
• Pausing within a particular internal chamber
• Rotating the case slightly during manual movement

Four internal intensity chambers

The removable sleeve is not smooth internally. Its tunnel contains four distinct stimulation areas linked by narrower transitions.

The listed textures include:

• Raised circular and angled ridges
• Flexible ticklers and small projections
• Rounded pleasure nubs
• Tighter transition points between chambers
• Changing tunnel widths and pressure zones

The first section begins at the swirl-shaped entrance and leads into progressively changing textures. The exact sensation will depend on penis length, girth, lubricant and how far the user strokes into the sleeve.

Adjustable suction through the screw-on cap

The cap at the closed end of the case regulates airflow. Changing its position alters the vacuum effect created as the penis moves inside the sleeve.

Suction may become more noticeable after several strokes as air is pushed from the case and the sleeve forms a closer seal around the penis.

The cap should be adjusted gradually. Maximum suction is not necessarily the most comfortable setting, particularly when using the sleeve for the first time.

Can Adam’s Trainer be used for stamina practice?

The product is marketed as a stamina trainer because its stimulating internal texture can be used for start-and-stop practice, pacing and edging.

A simple practice session may involve:

1. Beginning with the end cap loose and moving slowly.
2. Paying attention to changes in arousal rather than rushing.
3. Stopping movement before stimulation becomes overwhelming.
4. Waiting for arousal to reduce before restarting.
5. Changing speed, stroke depth or suction gradually.
6. Ending the session if the penis becomes sore, numb or irritated.

The term “trainer” does not mean that the product is a medical device or a guaranteed treatment for premature ejaculation or another sexual-function concern. Results will vary, and persistent concerns should be discussed with a qualified health professional.

Adam’s Trainer size and measurements

The current Adam & Eve listing provides the following measurements:

• Overall case length: 8.5 inches or approximately 21.6 cm
• Removable inner-sleeve length: 7 inches or approximately 17.8 cm
• Maximum case width: 3 inches or approximately 7.6 cm

The sleeve is soft and stretchable rather than manufactured with a rigid internal diameter. The merchant does not publish a guaranteed maximum penis girth.

A larger girth will create a tighter fit and greater friction. Adequate lubricant and a looser end cap become particularly important when the sleeve fits tightly.

Compact transparent grip case

Adam’s Trainer uses a shorter and lighter case than the traditional full-sized Fleshlight format. This may reduce arm fatigue and make the product easier to control during longer sessions.

The clear ABS housing provides:

• A view of the blue sleeve and internal movement
• Raised exterior rings and grip textures
• A removable front cover for storage
• An adjustable screw-on cap at the opposite end
• Protection for the soft sleeve between uses

The transparent design is visually distinctive but not especially discreet when the lid is removed. The complete unit should be stored privately and away from children.

How to use Adam’s Trainer

1. Remove the front storage lid.
2. Check that the sleeve is clean, fully dry and correctly positioned in the case.
3. Loosen the rear cap so airflow is not heavily restricted at the beginning.
4. Apply generous compatible lubricant to the penis and sleeve entrance.
5. Add a small amount of lubricant inside the first part of the tunnel.
6. Insert slowly through the swirl-shaped opening.
7. Begin with short, controlled manual strokes.
8. Increase stroke length only after confirming that the sleeve is comfortable.
9. Tighten the rear cap gradually when stronger suction is desired.
10. Pause and add more lubricant whenever friction increases.
11. Loosen the cap before withdrawing if the sleeve has formed a strong vacuum.
12. Remove and clean the sleeve immediately after use.

The product contains no powered movement. The user or partner supplies all stroking, twisting and positioning manually.

What lubricant can be used?

The current Adam & Eve listing describes the sleeve as compatible with both water-based and silicone-based lubricant.

A water-based lubricant remains the simplest conservative choice because it is easy to rinse from the textured TPE tunnel. When considering silicone-based lubricant, follow the instructions supplied with the current product rather than assuming that guidance for another Fleshlight sleeve applies to this model.

Do not assume oil-based products are compatible. Oils are not listed by the merchant and may be difficult to remove from a soft TPE sleeve.

How to clean Adam’s Trainer

The blue TPE sleeve should be removed and cleaned after every use.

1. Unscrew the caps and remove the soft sleeve from the clear case.
2. Flush warm water through the open-ended internal tunnel.
3. Use mild soap or a cleaner specifically identified as compatible with TPE sex toys.
4. Gently work water through the four textured chambers.
5. Rinse repeatedly until lubricant and cleaner residue have been removed.
6. Shake out excess water without aggressively stretching the sleeve.
7. Pat accessible exterior areas with a clean, lint-free cloth.
8. Leave the sleeve in a clean, ventilated location until completely dry.
9. Wash or wipe the plastic case and caps separately.
10. Make sure the case, cap and sleeve are fully dry before reassembly.

Do not boil the sleeve, place it in a dishwasher or use bleach, alcohol or harsh household cleaners. Extreme heat and strong chemicals may damage the soft TPE.

Using Fleshlight Renewing Powder

The merchant recommends applying a light coating of Fleshlight Renewing Powder after the sleeve has been cleaned and dried completely.

The powder is intended to reduce surface tackiness and help the Super Skin material retain its soft feel.

1. Confirm that the sleeve is completely dry.
2. Apply a light, even coating to the exterior.
3. Avoid creating heavy clumps inside the tunnel.
4. Shake or brush away excess powder.
5. Return the sleeve to the clean, dry case.

Renewing Powder and specialist cleaner are maintenance accessories and should not be assumed to be included unless the current merchant offer expressly lists them.

Material and durability

The removable sleeve is made from phthalate-free TPE marketed as Fleshlight Real Feel Super Skin. It is deliberately soft, flexible and stretchable.

TPE requires more care than a non-porous silicone toy. Its surface can become tacky, absorb odours or deteriorate when stored damp, exposed to incompatible products or stretched aggressively.

Inspect the sleeve regularly and replace it if it develops:

• Deep tears or splits
• Permanent unpleasant odour
• Discolouration that remains after cleaning
• A persistently sticky or degraded surface
• Residue that cannot be removed safely
• Visible mould or other contamination

The sleeve is best kept as a personal, single-user product. Its soft TPE material cannot be heat sterilised.

No batteries, charging or app required

Adam’s Trainer has no motor, vibration system, electronics or rechargeable battery.

This provides several practical advantages:

• No charging delay
• No battery degradation
• No electronic noise
• No Bluetooth pairing
• No smartphone app or account
• Complete control over speed and stroke length

The compromise is that all movement must be supplied manually. Buyers wanting automatic stroking, vibration or interactive content syncing will need a powered masturbator instead.

Not compatible with the Fleshlight Shower Mount

The current listing specifically states that Adam’s Trainer is not compatible with the Fleshlight Shower Mount.

The compact case dimensions and exterior design differ from the standard full-sized Fleshlight format used by that accessory.

Do not force the case into an incompatible mount or improvised holder. Damage to the case could affect grip, cap operation or sleeve alignment.

Who is Adam’s Trainer suited for?

Is Adam’s Trainer suitable for beginners?

It can suit a beginner who wants a manual Fleshlight product, but its multiple chambers and tight texture may feel more intense than a simple smooth sleeve.

A first-time user should:

• Use generous lubricant
• Begin with the end cap loose
• Use slow, short strokes
• Avoid gripping the case too firmly
• Pause whenever the sensation becomes too intense
• Learn the cleaning and drying routine before storage

Someone wanting the easiest possible introduction may prefer a smoother or less tightly textured sleeve.

Using Adam’s Trainer with a partner

A consenting partner can hold and move the case while the user concentrates on communicating preferred speed, pressure and suction.

Partnered use works best when:

• The user controls the end-cap suction initially
• Both people communicate about speed and stroke depth
• Additional lubricant remains within reach
• The case is held securely by its textured grip
• Movement stops immediately if discomfort develops

The sleeve should remain a personal-use item and should not be shared between multiple users.

Adam’s Trainer compared with other stroker styles

What is included?

The standard product consists of:

• One transparent textured ABS case
• One removable ice-blue Real Feel Super Skin sleeve
• One screw-on entrance cover
• One adjustable screw-on end cap

Lubricant, Fleshlight Renewing Powder and specialist toy cleaner should not be assumed to be included unless the current offer expressly identifies a bundle.

Important considerations before buying

Overall assessment

Adam’s Trainer by Fleshlight is a strongly textured manual masturbator that places more emphasis on changing internal pressure than a basic smooth sleeve.

Its strongest features are the four-chamber tunnel, adjustable suction, removable open-ended sleeve, lighter transparent case and complete independence from batteries or software.

Its main compromises are the detailed cleaning routine, the care requirements of soft TPE and the lack of automatic or app-controlled movement.

It is best suited to adults wanting a compact manual Fleshlight with strong texture and adjustable airflow, particularly users interested in controlled pacing or start-and-stop practice.

Frequently asked questions

What makes the Lovense Nora different?

Many rabbit vibrators rely on vibration in both arms. Nora instead uses a rotating internal head to provide circular pressure against the vaginal walls and G-spot area, while its flexible external arm supplies conventional clitoral vibration. Rotation direction, rotation strength and external vibration can be changed separately.

Lovense Nora at a glance

How does the Lovense Nora work?

The longer shaft is inserted vaginally and positioned so the rounded rotating head makes contact with the front vaginal wall or another preferred internal area.

The smaller flexible arm remains outside the body and rests against or near the clitoris. Its separate vibration system provides external stimulation while the internal head rotates.

Users can activate either function by itself or operate both simultaneously:

• Internal rotation without external vibration
• External vibration without rotation
• Rotation and vibration together
• Rotation in either available direction
• Changing app patterns and intensity combinations

Rotating G-spot head versus clitoral vibration

Independent rotation and vibration controls

Nora has two physical control buttons:

• Button A: hold for approximately three seconds to turn Nora on or off
• Button A, short press: change the external vibration setting
• Button B, short press: change the internal rotation setting
• Button B, hold: reverse the direction of the rotating head

This separation is useful when one area requires less stimulation than the other. A user can choose strong internal rotation with gentle clitoral vibration, or turn one function off entirely.

The Lovense Remote app adds more detailed control and allows users to create changing combinations instead of relying only on the stored button settings.

Flexible external clitoral arm

The clitoral arm bends more easily than the main insertable shaft. This helps it move toward or away from the external anatomy as the internal section is tilted.

The flexible design can accommodate different body shapes, but simultaneous contact is not guaranteed for every user. The distance between the vaginal opening, internal target area and clitoris differs between bodies.

Better external contact may be achieved by:

• Tilting the handle slightly forward or backward
• Changing the insertion depth
• Moving the external arm gently by hand
• Using a different body position
• Applying a small amount of water-based lubricant externally
• Keeping the arm close to the body during movement

How to insert and position Lovense Nora

The manufacturer recommends inserting Nora with its rotation switched off and approaching insertion at approximately a 45-degree angle.

1. Charge and clean Nora before use.
2. Apply adequate compatible lubricant to the insertable shaft and vaginal opening.
3. Make sure the rotating function is switched off.
4. Insert the rounded tip slowly at approximately a 45-degree angle.
5. Guide the curved shaft toward the front vaginal wall.
6. Position the shorter arm against or near the clitoris.
7. Activate the lowest rotation or vibration setting.
8. Adjust depth, angle and external-arm position gradually.
9. Increase one function at a time so each change remains easy to assess.
10. Turn the rotation off before removing the product.

Do not force the rotating head into position. Stop if the curve, rotation or external arm causes sharp pain, pinching, bleeding or persistent discomfort.

Rotating direction and internal pressure

Holding the rotation control reverses the direction of the rotating head. The change may affect which part of the vaginal wall receives the most pressure.

Some users may find one direction more comfortable or effective than the other because of anatomy, insertion angle or the side toward which the shaft is tilted.

The rotation can also be combined with gentle manual rocking. However, the shaft should not be twisted or forced against the direction of the internal mechanism.

Lovense Remote app control

Nora can be controlled through its physical buttons or connected to the Lovense Remote app on a compatible phone, tablet or computer.

Current listed functions include:

• Close-range Bluetooth control
• Internet-based long-distance partner control
• Independent rotation and vibration adjustment
• Unlimited custom stimulation patterns
• Patterns created and shared by other app users
• Music-synchronised stimulation
• Sound-activated stimulation
• Real-time control by an invited partner
• Content-synchronised rotation and vibration
• Interactive connection with selected Lovense toys

The app allows changes that would be difficult to create with the buttons alone, including gradual rises, drops, pulses and irregular combinations of vibration and rotation.

Long-distance partner control

A consenting partner can control Nora through the internet from another room, city or country.

The person using Nora connects it to their nearby phone through Bluetooth. Control can then be shared with an invited partner through Lovense Remote.

The remote partner can adjust the stimulation in real time, while the person using Nora can end the connection, withdraw permission or turn the product off physically.

Two-way Toy Sync with compatible Lovense products

Nora can exchange movement information with selected Lovense products, including Max 2, Calor and another Nora.

With a supported pairing, physical movement of one product can influence the response of the other. For example, moving Nora in and out can make a connected Max 2 respond, while activity from Max 2 can alter Nora’s stimulation.

This differs from ordinary remote control because the connected toy’s physical activity becomes part of the control input.

Compatibility varies by toy, software version and selected mode. Additional products are sold separately unless the current listing identifies a bundle.

Content, music and sound syncing

Nora can respond to supported interactive content through compatible Lovense software. The rotation and vibration can change according to programmed content data.

Music mode alters stimulation in response to compatible audio played through the connected device. Tracks with a clear beat generally create more noticeable changes.

Sound mode responds to audio detected by the phone or tablet microphone. This may include music, voices or other selected sounds.

Content support varies by website, service, operating system and region. Some interactive services may require separate software, accounts or subscriptions.

Manual use without a phone

A phone is not required for basic operation. Nora’s two-button control system lets the user activate and change both main functions directly.

Manual control is useful when:

• The phone is unavailable or charging
• The user prefers not to create an app account
• Bluetooth is unreliable
• The toy is being used near water
• A quick change or immediate stop is required

The app is required for long-distance access, custom patterns, content syncing and advanced interactive functions.

Lovense Nora size and measurements

The official Nora measurement diagram shows:

• Overall length: 242 mm or 9.53 inches
• Insertable shaft length: 120 mm or 4.72 inches
• Handle section: approximately 80 mm or 3.15 inches
• Maximum overall height: approximately 80 mm or 3.15 inches
• Published girth: approximately 120 mm or 4.72 inches
• Approximate main-shaft diameter: approximately 37–38 mm
• Product weight: approximately 380 grams

Who is Lovense Nora suited for?

Is Nora suitable for beginners?

Lovense positions Nora as a suitable first rabbit vibrator because the internal and external functions are independently adjustable.

A beginner should nevertheless consider its approximately 37–38 mm shaft diameter, 120 mm insertable length and 380 g weight.

A cautious first session should involve:

• Generous compatible lubricant
• Insertion with the rotation switched off
• A low external vibration setting
• The slowest comfortable rotation
• Testing one powered function at a time
• Keeping the physical controls within easy reach

Someone entirely new to vaginal insertion may find a smaller stationary vibrator easier to learn before progressing to a full-sized rotating rabbit.

Can Nora be used hands-free?

Nora does not have a suction cup, wearable support, harness or mounting system. It normally needs to be held or supported by the user or partner.

The app can change stimulation without repeated button presses, but it does not physically keep the rotating head and clitoral arm in position.

Some users may be able to hold Nora in place by closing their legs or maintaining a stable body position, but it should not be marketed as a dedicated wearable or hands-free product.

Using Nora during partnered play

A partner can hold, position or control Nora during foreplay and other consensual sexual activity.

The two-button layout allows one partner to change the rotation without automatically altering the external vibration. App control can also be used while the other partner holds the toy.

Nora is not designed to remain inserted during vaginal intercourse with a penis or another large penetrative toy. Its main shaft already occupies vaginal space and should not be forced between bodies.

Nora is not designed for anal insertion

Nora is marketed as a vaginal G-spot and external clitoral vibrator.

It does not have the broad, non-insertable flared base required for safe anal insertion. Neither the main shaft nor the smaller arm should be inserted rectally.

Choose a product specifically designed and approved for anal use when anal stimulation is required.

Body-safe silicone and ABS construction

The insertable and external contact areas use a smooth body-safe silicone exterior. The handle and internal structural components include ABS plastic.

The silicone provides a softer surface over the internal mechanisms, but the main shaft remains relatively structured because it contains the rotating assembly.

The external arm is more flexible than the insertable shaft so it can adapt to different external positions.

IPX6 water resistance

Nora has an IPX6 water-resistance rating. This means it can withstand strong water jets and routine washing but should not be treated as a fully submersible IPX7 product.

Do not leave Nora submerged in a bath, pool or basin. Shower use should remain within the current manufacturer instructions, and the charging contacts must remain disconnected.

Battery life and charging

Lovense advertises approximately 3.5 to four hours of continuous use. A newer official comparison lists up to approximately 240 minutes, while another product comparison displays up to 245 minutes.

Actual battery duration depends on rotation speed, vibration strength, app connection, pattern selection and battery condition.

A complete charge takes approximately 150 minutes or 2.5 hours. The solid red indicator turns off when charging is complete.

Published standby time is up to approximately 120 hours or five days.

How to clean Lovense Nora

Clean Nora before and after every use.

1. Turn both powered functions off.
2. Disconnect the magnetic charging cable.
3. Wash the silicone contact areas with warm water.
4. Use mild unscented soap or a suitable sex-toy cleaner.
5. Clean around the rotating head, clitoral arm, shaft and control area.
6. Rinse without leaving the complete product submerged.
7. Dry Nora thoroughly with a clean, lint-free cloth.
8. Allow it to air-dry before charging or storage.
9. Keep the product away from extreme heat and cold.

Do not boil Nora or place it in a dishwasher. The rechargeable battery and internal rotation mechanism are not designed for heat sterilisation.

What lubricant should be used?

The manufacturer advises applying adequate lubricant to the body and toy before insertion.

A quality water-based lubricant is the safest general choice for a silicone-covered vibrator. Apply it to the rotating head, shaft and vaginal opening before insertion.

Reapply lubricant if movement begins to drag or the rotation creates uncomfortable friction.

Avoid allowing excessive lubricant to make the handle and controls difficult to grip.

Phone and computer compatibility

The current official Nora guide lists compatibility with:

• Compatible iPhone, iPad and iPod Touch devices using iOS 14.2 or later
• Android 5.0 or later with Bluetooth 4.0 enabled
• Compatible Mac computers with Bluetooth 4.0 enabled
• Windows computers using the separately available Lovense USB Bluetooth Adapter

App and operating-system requirements can change. Buyers using an older phone, tablet or computer should check current compatibility before ordering.

What is included with Lovense Nora?

The current standard listing includes:

• One Lovense Nora Bluetooth rabbit vibrator
• One magnetic USB charging cable
• One user manual

Water-based lubricant, toy cleaner, storage accessories, other Lovense toys and the Windows USB Bluetooth Adapter are normally sold separately unless the current offer identifies a bundle.

Nora compared with Velvo and Osci 3

Important considerations before buying

Overall assessment

The Lovense Nora remains a practical choice for buyers who want a traditional rabbit-vibrator shape combined with modern app control. Its internal rotating head produces a different sensation from the vibration-only shafts found in many competing products.

Its strongest features are the independently controlled rotation and clitoral vibration, reversible internal movement, flexible external arm, long battery life, extensive app functions and interactive Toy Sync compatibility.

Its main compromises are its relatively heavy body, flexible rather than firm clitoral arm, IPX6 water resistance and lack of automatic thrusting.

Nora is best suited to adults who enjoy rotating internal pressure, want simultaneous clitoral vibration and value close-range, long-distance and interactive partner controls.

Frequently asked questions